Hello, I am a ham radio and I own a zgemma h92h and I would need to receive a transponder on QO-100 (26E) to 10492 MHz with a universal LNB (OL 9750). The frequency sent to the receiver would therefore be 742 MHz, lower than the 950 MHz canons normally admissible.
It would be possible to rewrite the tuner driver so that the receiver extends the frequency range starting from 700 instead of 950 MHz.
Many OM would be extremely grateful.
Marlix
Hello,
please add to OpenPLi images new CCcam
plugins->softcam new CCcam 2.3.8 version.
Best regards!
I've been searching around for a smoother way to crosscompile Oscam so that it runs on the latest OpenPLi, in particular for my STB (which is a Vu+ Zero 4K). I have done this in the past for an entirely different mipsel receiver. Being completely honest, I don't really have my Vu Zero 4k yet (it's still shipping), so all my assumptions about the toolkit are made by manually inspecting the latest release zips.
I have tried cloning the Oscam repo, properly configured it (barebones without webif or SSL), and used the latest release of stbgcc-6.3 to try to crosscompile. Unlike the toolkit I had used for mipsel, the stbgcc-6.3 does not have headers/stubs for openssl -- which causes the crosscompile to fail (see the output bellow).
There are a few crude ways to work-around this (ie., compile my own version of libraries with stbgcc-6.3 and statically link them in the binary), however I would like to humbly ask what is the proper way to crosscompile Oscam so that it runs on latest OpenPLi.
user@host:/home/build/oscam-vu$ make CROSS=/home/build/stbgcc-6.3-1.6/bin/arm-linux-gnueabihf- CC_OPTS="-mcpu=cortex-a15 -O2"
+-------------------------------------------------------------------------------
| OSCam ver: 1.20_svn rev: 11518 target: arm-linux-gnueabihf
| Tools:
| CROSS = /home/build/stbgcc-6.3-1.6/bin/arm-linux-gnueabihf-
| CC = /home/build/stbgcc-6.3-1.6/bin/arm-linux-gnueabihf-gcc
| Settings:
| CONF_DIR = /usr/local/etc
| CC_OPTS = -mcpu=cortex-a15 -O2
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS =
| LDFLAGS = -Wl,--gc-sections
| LIBS = -lm -lpthread -ldl
| UseFlags =
| Config:
| Addons : HAVE_DVBAPI IRDETO_GUESSING
| Protocols: CCCAM
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD
| CardRdrs : INTERNAL
| Compiler : arm-linux-gnueabihf-gcc (crosstool-NG ) 6.3.0
| Config : build/arm-linux-gnueabihf/config.mak
| Binary : Distribution/oscam-1.20_svn11518-arm-linux-gnueabihf
+-------------------------------------------------------------------------------
CC cscrypt/aes.c
CC cscrypt/bn_add.c
CC cscrypt/bn_asm.c
CC cscrypt/bn_ctx.c
CC cscrypt/bn_div.c
CC cscrypt/bn_exp.c
CC cscrypt/bn_lib.c
CC cscrypt/bn_mul.c
CC cscrypt/bn_print.c
CC cscrypt/bn_shift.c
CC cscrypt/bn_sqr.c
CC cscrypt/bn_word.c
CC cscrypt/mem.c
CC cscrypt/des.c
CC cscrypt/i_cbc.c
CC cscrypt/i_ecb.c
CC cscrypt/i_skey.c
CC cscrypt/md5.c
CC cscrypt/rc6.c
CC cscrypt/sha1.c
CC cscrypt/mdc2.c
In file included from cscrypt/mdc2.c:3:0:
cscrypt/mdc2.h:62:25: fatal error: openssl/des.h: No such file or directory
#include <openssl/des.h>
^
compilation terminated.
make[1]: *** [Makefile:423: build/arm-linux-gnueabihf/cscrypt/mdc2.o] Error 1
make: *** [Makefile:376: all] Error 2
I tried to manually install (from ipk in /tmp) the IPTV Player on a Vu+ Zero with latest OpenPli image. The following error message occurs:
...
python-e2icjson needed be enigma2-plugin...
...
How can the missing package python-e2icjson be installed?
IPK Creator 5.0
Version 5.0 - Windows, Linux, macOS binaries added (x86/x64) - "Recommends" added - "armv7ahf-neon" and "cortexa9hf-neon" architectures added - no check for characters so you can create anything - less required fields in red - lots of fixes/improvements - clean and rebuild using JDK 8u102/NetBeans 8.1
IPK Feed Generator 1.0
Version 1.0 You need to install JRE (Java Runtime Environment) ! Download it from http://www.filehippo.com/download_jre/ (Windows) Recommended JRE version : 8.0 build 102 Place your IPK files here then run IPKFeedGenerator.jar It will create Packages and Packages.gz for you ================================================== As you know you can run a jar file in any operating system (Windows, Linux, macOS, ...) because it's Java I did compile it with Java 8u102/NetBeans 8.1 so you need JRE 1.8.x Enjoy creating IPK feeds
I would like to have a Subversion Command-Line Client in Openpli. Does that exist ? Want to download files from github via cron but so far no succes.
Hi,
Because I like the concept of ZeroTier, I tried to find a sw package for openpli/enigma2. Is this available or did someone compiled it for this platform ?
So far no luck
hello team stalker and kodi no working for maxytec multibox.
OMFG....just when I thought I understood a tiny little bit how it works...
I had to reflash OpenPli 6.1, which went fine.
Then my back up did not have the iptv player from SamSamSam installed,
so I decided to re-install that with telnet (iMac High Sierra 10.13.2) through the program iDreamX.
This has always worked fine until now but..
When I start a telnet session, it immediately closes.
I tried to go back to OP6.0 but that gives me the same closed telnet session.
Anyone that can advise me how to solve this?
Is there another way to re-install Samx3's iptvplayer?
Hello,
I would like to make changes in the FastScan config file (plugin.py).
In the class FastScanScreen there are definitions of ops like: ('Canal Digitaal', (1, 900, True)), - what is the meaning of the True parameter here?
In the same class there are definitions of the Home TPs like for the sat position 19.2E:
transponders = ((12515000, 22000000, eDVBFrontendParametersSatellite.FEC_5_6, 192,
eDVBFrontendParametersSatellite.Polarisation_Horizontal, eDVBFrontendParametersSatellite.Inversion_Unknown,
eDVBFrontendParametersSatellite.System_DVB_S, eDVBFrontendParametersSatellite.Modulation_QPSK,
eDVBFrontendParametersSatellite.RollOff_alpha_0_35, eDVBFrontendParametersSatellite.Pilot_Off),
How to define a sat position like 0,8W there?
Thanks.
Hi. I've not used my Zgemma from a long time but now I would know if there is an update for serviceapp that I've downloaded from openpli plugins 1 year ago. I'm using openPLI 6 but in my downloadable plugin list I don't see anymore serviceapp between the system plugins. On github I see that the project has been closed.
So now there isn't anymore Serviceapp or similar projects?
wget http://tunisia-dreambox.info/TSplugins/TuneinRadio/TuneinRadioInstaller.sh -O - | /bin/sh
Find it a github/oottppxx.
If you happen to test it, let me know how it goes.
Hi,
why e2 not support scannig BAT_table ?
In satellites.xml flag
2 -> use BAT
but this ignored and not created BAT list
I have an issue with some wifi sticks and import the fallbacktuner channellist. (I know a wired ethernet is better but wifi works fine as well)
9 of 10 wifi sticks it works fine but a few I have issue when the box startup. It seems some wifi sticks need some extra time to start and then the channel import from the fallbacktuner fails.
I use the follow setting for import channellist by start: "Also import at reboot/restart enigma2"
Is it possible to load the channellist from the fallbacktuner after the ethernet/wifi connection is up?
