Hi, we would really appreciate some help with an issue we are having using the

e2m3u2bouquet plugin.

This plugin is installed and can be used without any issues with the OpenVix image

but we are unable to use it with OpenPli - our preferred image.

The issue is, after manually installing the 0.6.3 version of the plugin which is a whole lot easier for us

to use, we add our provider, username/password as required then select 'run' to update channels

but at this point nothing happens at all. All details entered are correct yet the update doesn't begin

so no channels/bouquets for iptv are imported at all.

We install the 0.6.3 version as we have no knowledge of how to use the script in the new version available

in 'downloads'. 

It really would be so helpful if the 0.6.3 version could be made available as well as the latest version as it works

in a so much easier way to add provider details than the current version, if you do not have more 'expert' knowledge.

The receiver is an Xtrend 9200.

As i have mentioned, this plugin works without any issues in OpenVix but we really would like to use OpenPli if

we could get this plugin to work.

Any help would be very much appreciated.

Dear Respectable Team
 
I'm searching for Auto Bouquet Maker for OpenPLi 5 and unfortunately,
I can't catch it,
so could you please share with me this plugin.

Openpli-develop-sumo branch-not play bluray.

Hi,

I'm new to openpli and bitbake and have a couple of questions.

I'm trying to build openpli with MastaG and Persian prince pli-extra addon

I have two problems:

1- when building the feeds for an aarch64 architecture I get the following error:

 

DEBUG: Executing shell function do_install
| install: cannot stat '/home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/CCcam.aarch64': No such file or directory
| WARNING: /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/temp/run.do_install.12796:1 exit 1 from 'install -m 0755 /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/CCcam.aarch64 /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/image/usr/bin/CCcam'
| ERROR: Function failed: do_install (log file is located at /home/oealliancebuilder/openpli-oe-core/build/tmp/work/aarch64-oe-linux/enigma2-plugin-softcams-cccam/2.3.2-r0/temp/log.do_install.12796)
ERROR: Task (/home/oealliancebuilder/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-cccam_2.3.2.bb:do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5397 tasks of which 5392 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/oealliancebuilder/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-cccam_2.3.2.bb:do_install
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:129: recipe for target 'feed' failed
make: *** [feed] Error 1
 

This is because the cccam binaries provided by openpli at http://downloads.ope...CCcam-2.3.2.zip doesn't contain a binary for aarch64.

So can I tell bitbake to ignore cccam and not build it since I don't want it for now?

2- I'm working on fixing classes and recipes that are provided from the pli-extra repo and because of that I had to delete some files from the deploy/images directory, running the make image again create some files but not all of them, I don't want to delete the whole build directory and run the build from the start(which lasted about 6 hours), So is there a clean command to delete the target binaries without recompiling the whole recipes( so no need to recompiles tools that get executed on the build machine for example)

again I'm new to openpli so sorry if the question was stupid.

thanks

Hello. Is it possible to change the position and size of the screen/widget after it has been created? I am controlling position and size with self.skin variable, but it appears that this is only read during creation.

I tried examining screen and widget members, and found Screen.instance.size().setWidth method, but self.instance.size().setWidth(800) did not have any effect.

What methods can I use to check if recording is currently active, or if they are pending N minutes from now? Basically I want to do same check that enigma2 does when starting, to avoid restarting if recordings are active or pending.

Hi, I have a question regarding the image for the gigablue eu4K. I have it from December 2017 , the Image from December 2017 to January 2018 are OK, then also then also the image of OPENPLI cause it, that when I give the channels that are in the HEVC 265, so I can't see anything but only sound. This is reflected also on FTA channels.  only restart the receiver is then OK. What changed is something what this causes? The same problem have also VU, where it is solved in another image. Thank you

Hi

I'm new with OpenPLi image and all it's functions.

There also so many new functions, plugins, skins, picon and so on.

I have used LT7 image until now but the system crashed so I had to install a new image.

Is there a Wiki or any other place that lists and explain all known plugins?

And if OpenPLI has a own page, lists all OpenPLI plugins and other third-party plugins that works with OpenPLI image, but also which plugins that NOT works with OpenPLI and why they NOT work with OpenPLI.

I would be a huge help if there is a such list, because it's not always self explained what a specific plugin do.

I think it would be a huge help for other newbees also so it would be a good thing to pin a thread with links to such place even if it isn't a OpenPLi place.

best regards

nisseH

E-Channelizer
A stylish, fast, feature-rich yet lightweight settings editor for digital satellite set-top boxes powered by Enigma firmware.
 

Features

General
- Freeware for the community developed mainly in love of hobby.
- Super-fast with background processing and multi-threading support.
- Fully portable; neither administrator privileges nor registry modification is required.
- Automatic updates (self-updatable).

Functionality
- Create new, open, and save local settings files.
- Open settings from recently opened files.
- Check and fix settings errors.
- Add, edit, and delete satellites, transponders, services, bouquets, and favorites.
- Validation of user inputs and actions.
- Parental control support (blacklist, whitelist or none).

Transponders
- Support satellites, cable and terrestrial dvb.
- Filter services by satellites, cable and terrestrial.
- In-line edit of satellites and transponders from the satellites.xml file.
- Add missing and update existing transponders from services data.
- Delete empty satellites, and unused satellites or transponders.
- Import satellites from local XML file or STB.

Services
- Unique icons for service types and flags (locked, new, hidden, encrypted).
- Sort and custom filter by service types and flags.
- Advanced search with instant highlighted results.
- Quick access to bouquets which the favorite services are added.
- Batch edit of multiple services at once.
- Add services to a new bouquet.
- Add services to a bouquet by drag and drop.
- Remove services from all bouquets at once.
- Copy, cut and paste services between multiple windows.

Favorites
- Advanced search with instant highlighted results.
- Insert markers.
- Insert stream (TS/DVBS and Non-TS).
- Rename favorites, reset names and change name letter-cases.
- Sort favorites alphabetically while optionally keep markers in place.
- Change parental control of favorites.
- Re-arrange favorites by drag and drop.
- Copy or move favorites between bouquet by drag and drop.
- Copy, cut and paste favorites between multiple bouquets or windows.
- Paste services from clipboard.

Profiles
- Support multiple STB profiles grouped in sections.
- Customize STB network configuration, file directories, HTTP/FTP ports.
- Support HTTP/FTP over secured SSL/TLS protocols and FTP passive mode.
- Test connectivity and check online status of STBs.
- Read, write and reload settings from STBs over the local network.
- Customize which files being transferred to STB and the reloading method.

Screenshots

Supported Firmwares
- Enigma 2,
- Dreambox OS.

System Requirements
- Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2,
- .NET Framework 4.5 or higher
- 5MB of free disk space.

Download
www.echannelizer.com

Bug Reporting
If you ever find an issue or encountered a problem, kindly do not hesitate to report a bug to help us fix it and make the program better.

Useful Links
Localization
Tutorials

Regards
Sayyid A.

Please find attached a new enigma2 plugin YouTubePlayer.

Regards, pcd.

Please find attached a new enigma2 plugin BBCiplayer.

Regards, pcd.

Please find attached a new enigma2 plugin Porncenter.

Strictly adult 18+ videos.

Regards, pcd.

On DVB-T signals, there are NID and ONID values, different.

I can only see ONID on enigma systems.

How can NID value be read ???  It seems to be overwritten by Namespace.

Hi Guys,

i'm searching for Sattube Plugin for enigma 2 openPLI image , so please can anyone share it with me 

Please find attached a new enigma2 plugin ITV which plays UK ITV catchup videos.

Regards, pcd.

Hello everybody,

I'm trying to convert (no transcoding needed) the http stream on the port 8001 to udp or rtp stream using ffmeg.

I'm using the following command from my vu+ solo receiver:

root@vusolo:~# ffmpeg -v trace -i "http://127.0.0.1:8001/1:0:19:A01:6:20FA:20D0000:0:0:0:" -acodec copy -vcodec copy -f mpegts udp://@127.0.0.1:8888

I got the following trace:

root@vusolo:~# ffmpeg -v trace -i "http://127.0.0.1:8001/1:0:19:A01:6:20FA:20D0000:0:0:0:" -acodec copy -vcodec copy -f mpegts udp://@127.0.0.1:8888
ffmpeg version 3.0.2 Copyright (c) 2000-2016 the FFmpeg developers
  built with gcc 4.9.1 (GCC)
  configuration: --disable-stripping --enable-pic --enable-shared --enable-pthreads --enable-nonfree --cross-prefix=mipsel-oe-linux- --ld='mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/media/data2/ff/build/tmp/sysroots/vuduo' --arch=mipsel --target-os=linux --enable-cross-compile --extra-cflags=' -Os -pipe -g -feliminate-unused-debug-types -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/media/data2/ff/build/tmp/sysroots/vuduo' --extra-ldflags='-Wl,-O1 -Wl,--as-needed' --sysroot=/media/data2/ff/build/tmp/sysroots/vuduo --enable-hardcoded-tables --disable-static --disable-runtime-cpudetect --disable-ffserver --disable-ffplay --enable-ffprobe --disable-iconv --disable-doc --disable-altivec --disable-amd3dnow --disable-amd3dnowext --disable-mmx --disable-mmxext --disable-sse --disable-sse2 --disable-sse3 --disable-ssse3 --disable-sse4 --disable-sse42 --disable-avx --disable-xop --disable-fma3 --disable-fma4 --disable-avx2 --disable-armv5te --disable-armv6 --disable-armv6t2 --disable-vfp --disable-neon --disable-inline-asm --disable-yasm --disable-fast-unaligned --disable-muxers --enable-muxer=mpeg1video --enable-encoders --enable-encoder=mpeg1video --disable-decoders --enable-libass --enable-decoder=alac --enable-decoder=ape --enable-decoder=atrac1 --enable-decoder=atrac3 --enable-decoder=atrac3p --enable-decoder=cook --enable-decoder=dsd_lsbf --enable-decoder=dsd_lsbf_planar --enable-decoder=dsd_msbf --enable-decoder=dsd_msbf_planar --enable-decoder=eac3 --enable-decoder=evrc --enable-decoder=iac --enable-decoder=imc --enable-decoder=mace3 --enable-decoder=mace6 --enable-decoder=metasound --enable-decoder=mjpeg --enable-decoder=mlp --enable-decoder=mp1 --enable-decoder=mp3adu --enable-decoder=mp3on4 --enable-decoder=mpeg1video --enable-decoder=nellymoser --enable-decoder=pcm_alaw --enable-decoder=pcm_bluray --enable-decoder=pcm_dvd --enable-decoder=pcm_f32be --enable-decoder=pcm_f32le --enable-decoder=pcm_f64be --enable-decoder=pcm_f64le --enable-decoder=pcm_lxf --enable-decoder=pcm_mulaw --enable-decoder=pcm_s16be --enable-decoder=pcm_s16be_planar --enable-decoder=pcm_s16le --enable-decoder=pcm_s16le_planar --enable-decoder=pcm_s24be --enable-decoder=pcm_s24daud --enable-decoder=pcm_s24le --enable-decoder=pcm_s24le_planar --enable-decoder=pcm_s32be --enable-decoder=pcm_s32le --enable-decoder=pcm_s32le_planar --enable-decoder=pcm_s8 --enable-decoder=pcm_s8_planar --enable-decoder=pcm_u16be --enable-decoder=pcm_u16le --enable-decoder=pcm_u24be --enable-decoder=pcm_u24le --enable-decoder=pcm_u32be --enable-decoder=pcm_u32le --enable-decoder=pcm_u8 --enable-decoder=pcm_zork --enable-decoder=ra_144 --enable-decoder=ra_288 --enable-decoder=ralf --enable-decoder=s302m --enable-decoder=shorten --enable-decoder=sipr --enable-decoder=sonic --enable-decoder=tak --enable-decoder=truehd --enable-decoder=truespeech --enable-decoder=tta --enable-decoder=wmalossless --enable-decoder=wmapro --enable-decoder=wmav1 --enable-decoder=wmav2 --enable-decoder=wmavoice --enable-decoder=aac --enable-decoder=aac_latm --enable-decoder=adpcm_ct --enable-decoder=adpcm_g722 --enable-decoder=adpcm_g726 --enable-decoder=adpcm_g726le --enable-decoder=adpcm_ima_amv --enable-decoder=adpcm_ima_oki --enable-decoder=adpcm_ima_qt --enable-decoder=adpcm_ima_rad --enable-decoder=adpcm_ima_wav --enable-decoder=adpcm_ms --enable-decoder=adpcm_sbpro_2 --enable-decoder=adpcm_sbpro_3 --enable-decoder=adpcm_sbpro_4 --enable-decoder=adpcm_swf --enable-decoder=adpcm_yamaha --enable-decoder=flac --enable-decoder=g723_1 --enable-decoder=g729 --enable-decoder=opus --enable-decoder=qcelp --enable-decoder=qdm2 --enable-decoder=vorbis --enable-decoder=wavpack --disable-demuxer=adp --disable-demuxer=adx --disable-demuxer=afc --disable-demuxer=anm --disable-demuxer=apc --disable-demuxer=ast --disable-demuxer=avs --disable-demuxer=bethsoftvid --disable-demuxer=bfi --disable-demuxer=bink --disable-demuxer=bmv --disable-demuxer=brstm --disable-demuxer=c93 --disable-demuxer=cdg --disable-demuxer=dnxhd --disable-demuxer=dsicin --disable-demuxer=dfa --disable-demuxer=dxa --disable-demuxer=ea --disable-demuxer=ea_cdata --disable-demuxer=frm --disable-demuxer=gif --disable-demuxer=gsm --disable-demuxer=gxf --disable-demuxer=hnm --disable-demuxer=ico --disable-demuxer=ilbc --enable-demuxer=image2 --disable-demuxer=iss --disable-demuxer=jv --disable-demuxer=mm --disable-demuxer=paf --disable-demuxer=pva --disable-demuxer=qcp --disable-demuxer=redspark --disable-demuxer=rl2 --disable-demuxer=roq --disable-demuxer=rsd --disable-demuxer=rso --disable-demuxer=siff --disable-demuxer=smjpeg --disable-demuxer=smush --disable-demuxer=sol --disable-demuxer=thp --disable-demuxer=tiertexseq --disable-demuxer=tmv --disable-demuxer=tty --disable-demuxer=txd --disable-demuxer=vqf --disable-demuxer=wsaud --disable-demuxer=wsvqa --disable-demuxer=xa --disable-demuxer=xbin --disable-demuxer=yop --disable-demuxer=ingenient --disable-demuxer=image_dds_pipe --disable-demuxer=image_dpx_pipe --disable-demuxer=image_exr_pipe --disable-demuxer=image_j2k_pipe --disable-demuxer=image_pictor_pipe --disable-demuxer=image_qdraw_pipe --disable-demuxer=image_sgi_pipe --disable-demuxer=image_sunrast_pipe --disable-filters --enable-filter=scale --disable-mips32r2 --disable-mipsdsp --disable-mipsdspr2 --enable-mipsfpu --enable-libbluray --enable-protocol=bluray --enable-librtmp --disable-indevs --disable-outdevs --pkg-config=pkg-config --disable-debug --extra-cflags='-ffunction-sections -fdata-sections -fno-aggressive-loop-optimizations' --extra-ldflags='-Wl,--gc-sections,-lrt' --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --datadir=/usr/share/ffmpeg --enable-avdevice --enable-avfilter --enable-bzlib --disable-libfaac --enable-gpl --disable-libgsm --disable-indev=jack --disable-libvorbis --disable-lzma --enable-libmp3lame --enable-openssl --disable-libschroedinger --disable-libspeex --enable-libtheora --disable-vaapi --enable-libvpx --disable-x11grab --enable-libx264 --disable-outdev=xv
  libavutil      55. 17.103 / 55. 17.103
  libavcodec     57. 24.102 / 57. 24.102
  libavformat    57. 25.100 / 57. 25.100
  libavdevice    57.  0.101 / 57.  0.101
  libavfilter     6. 31.100 /  6. 31.100
  libswscale      4.  0.100 /  4.  0.100
  libswresample   2.  0.101 /  2.  0.101
  libpostproc    54.  0.100 / 54.  0.100
Splitting the commandline.
Reading option '-v' ... matched as option 'v' (set logging level) with argument 'trace'.
Reading option '-i' ... matched as input file with argument 'http://127.0.0.1:8001/1:0:19:A01:6:20FA:20D0000:0:0:0:'.
Reading option '-acodec' ... matched as option 'acodec' (force audio codec ('copy' to copy stream)) with argument 'copy'.
Reading option '-vcodec' ... matched as option 'vcodec' (force video codec ('copy' to copy stream)) with argument 'copy'.
Reading option '-f' ... matched as option 'f' (force format) with argument 'mpegts'.
Reading option 'udp://@127.0.0.1:8888' ... matched as output file.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option v (set logging level) with argument trace.
Successfully parsed a group of options.
Parsing a group of options: input file http://127.0.0.1:8001/1:0:19:A01:6:20FA:20D0000:0:0:0:.
Successfully parsed a group of options.
Opening an input file: http://127.0.0.1:8001/1:0:19:A01:6:20FA:20D0000:0:0:0:.
[http @ 0x45b430] Setting default whitelist 'http,https,tls,rtp,tcp,udp,crypto,httpproxy'
[http @ 0x45b430] request: GET /1:0:19:A01:6:20FA:20D0000:0:0:0: HTTP/1.1
User-Agent: Lavf/57.25.100
Accept: */*
Range: bytes=0-
Connection: close
Host: 127.0.0.1:8001
Icy-MetaData: 1


[http @ 0x45b430] header='HTTP/1.0 200 OK'
[http @ 0x45b430] http_code=200
[http @ 0x45b430] header='Connection: Close'
[http @ 0x45b430] header='Content-Type: video/mpeg'
[http @ 0x45b430] header='Server: streamserver'
[http @ 0x45b430] header=''
Probing mp3 score:1 size:2048
Probing mpegts score:100 size:2048
[mpegts @ 0x45ad20] Format mpegts probed with size=2048 and score=100
score: 44, dvhs_score: 1, fec_score: -1
[mpegts @ 0x45ad20] Filter: pid=0x11
[mpegts @ 0x45ad20] Filter: pid=0x0
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] sid=0x1 pid=0x40
[mpegts @ 0x45ad20] new_program: id=0x0001
[mpegts @ 0x45ad20] Filter: pid=0x40
[mpegts @ 0x45ad20] sid=0x2 pid=0x24e
[mpegts @ 0x45ad20] new_program: id=0x0002
[mpegts @ 0x45ad20] Filter: pid=0x24e
[mpegts @ 0x45ad20] sid=0xa01 pid=0x64
[mpegts @ 0x45ad20] new_program: id=0x0a01
[mpegts @ 0x45ad20] Filter: pid=0x64
[mpegts @ 0x45ad20] sid=0xa02 pid=0xd2
[mpegts @ 0x45ad20] new_program: id=0x0a02
[mpegts @ 0x45ad20] Filter: pid=0xd2
[mpegts @ 0x45ad20] sid=0xa03 pid=0x12c
[mpegts @ 0x45ad20] new_program: id=0x0a03
[mpegts @ 0x45ad20] Filter: pid=0x12c
[mpegts @ 0x45ad20] sid=0xa04 pid=0x190
[mpegts @ 0x45ad20] new_program: id=0x0a04
[mpegts @ 0x45ad20] Filter: pid=0x190
[mpegts @ 0x45ad20] sid=0xa05 pid=0x1f4
[mpegts @ 0x45ad20] new_program: id=0x0a05
[mpegts @ 0x45ad20] Filter: pid=0x1f4
[mpegts @ 0x45ad20] sid=0x201 pid=0x6e
[mpegts @ 0x45ad20] new_program: id=0x0201
[mpegts @ 0x45ad20] Filter: pid=0x6e
[mpegts @ 0x45ad20] sid=0x203 pid=0x136
[mpegts @ 0x45ad20] new_program: id=0x0203
[mpegts @ 0x45ad20] Filter: pid=0x136
[mpegts @ 0x45ad20] sid=0x204 pid=0x19a
[mpegts @ 0x45ad20] new_program: id=0x0204
[mpegts @ 0x45ad20] Filter: pid=0x19a
[mpegts @ 0x45ad20] sid=0x205 pid=0x1fe
[mpegts @ 0x45ad20] new_program: id=0x0205
[mpegts @ 0x45ad20] Filter: pid=0x1fe
[mpegts @ 0x45ad20] sid=0x206 pid=0x262
[mpegts @ 0x45ad20] new_program: id=0x0206
[mpegts @ 0x45ad20] Filter: pid=0x262
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] sid=0xa01 sec_num=0/0 version=7
[mpegts @ 0x45ad20] pcr_pid=0x78
[mpegts @ 0x45ad20] Filter: pid=0x78
[mpegts @ 0x45ad20] stream=0 stream_type=1b pid=78 prog_reg_desc=
[mpegts @ 0x45ad20] Filter: pid=0x82
[mpegts @ 0x45ad20] stream=1 stream_type=6 pid=82 prog_reg_desc=
[mpegts @ 0x45ad20] tag: 0x0a len=4
[mpegts @ 0x45ad20] tag: 0x7a len=2
[mpegts @ 0x45ad20] Filter: pid=0x83
[mpegts @ 0x45ad20] stream=2 stream_type=6 pid=83 prog_reg_desc=
[mpegts @ 0x45ad20] tag: 0x0a len=4
[mpegts @ 0x45ad20] tag: 0x7a len=2
[mpegts @ 0x45ad20] Filter: pid=0x84
[mpegts @ 0x45ad20] stream=3 stream_type=6 pid=84 prog_reg_desc=
[mpegts @ 0x45ad20] tag: 0x0a len=4
[mpegts @ 0x45ad20] tag: 0x7f len=5
[mpegts @ 0x45ad20] tag: 0x7a len=2
[mpegts @ 0x45ad20] Filter: pid=0x96
[mpegts @ 0x45ad20] stream=4 stream_type=6 pid=96 prog_reg_desc=
[mpegts @ 0x45ad20] tag: 0x59 len=8
[mpegts @ 0x45ad20] Filter: pid=0x97
[mpegts @ 0x45ad20] stream=5 stream_type=6 pid=97 prog_reg_desc=
[mpegts @ 0x45ad20] tag: 0x59 len=8
[mpegts @ 0x45ad20] tuning done
[mpegts @ 0x45ad20] Before avformat_find_stream_info() pos: 0 bytes read:65536 seeks:0
[mpegts @ 0x45ad20] Skipping after seek
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] sid=0x1 pid=0x40
[mpegts @ 0x45ad20] new_program: id=0x0001
[mpegts @ 0x45ad20] sid=0x2 pid=0x24e
[mpegts @ 0x45ad20] new_program: id=0x0002
[mpegts @ 0x45ad20] sid=0xa01 pid=0x64
[mpegts @ 0x45ad20] new_program: id=0x0a01
[mpegts @ 0x45ad20] sid=0xa02 pid=0xd2
[mpegts @ 0x45ad20] new_program: id=0x0a02
[mpegts @ 0x45ad20] sid=0xa03 pid=0x12c
[mpegts @ 0x45ad20] new_program: id=0x0a03
[mpegts @ 0x45ad20] sid=0xa04 pid=0x190
[mpegts @ 0x45ad20] new_program: id=0x0a04
[mpegts @ 0x45ad20] sid=0xa05 pid=0x1f4
[mpegts @ 0x45ad20] new_program: id=0x0a05
[mpegts @ 0x45ad20] sid=0x201 pid=0x6e
[mpegts @ 0x45ad20] new_program: id=0x0201
[mpegts @ 0x45ad20] sid=0x203 pid=0x136
[mpegts @ 0x45ad20] new_program: id=0x0203
[mpegts @ 0x45ad20] sid=0x204 pid=0x19a
[mpegts @ 0x45ad20] new_program: id=0x0204
[mpegts @ 0x45ad20] sid=0x205 pid=0x1fe
[mpegts @ 0x45ad20] new_program: id=0x0205
[mpegts @ 0x45ad20] sid=0x206 pid=0x262
[mpegts @ 0x45ad20] new_program: id=0x0206
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] sid=0xa01 sec_num=0/0 version=7
[mpegts @ 0x45ad20] pcr_pid=0x78
[mpegts @ 0x45ad20] tag: 0x0a len=4
[mpegts @ 0x45ad20] tag: 0x7a len=2
[mpegts @ 0x45ad20] tag: 0x0a len=4
[mpegts @ 0x45ad20] tag: 0x7a len=2
[mpegts @ 0x45ad20] tag: 0x0a len=4
[mpegts @ 0x45ad20] tag: 0x7f len=5
[mpegts @ 0x45ad20] tag: 0x7a len=2
[mpegts @ 0x45ad20] tag: 0x59 len=8
    Last message repeated 1 times
[mpegts @ 0x45ad20] pid=84 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=83 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=82 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
    Last message repeated 1 times
[h264 @ 0x470300] non-existing PPS 0 referenced
    Last message repeated 1 times
[h264 @ 0x470300] decode_slice_header error
[h264 @ 0x470300] no frame!
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] pid=83 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=82 pes_code=0x1bd
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] pid=84 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=96 pes_code=0x1be
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] pid=97 pes_code=0x1be
[h264 @ 0x470300] non-existing PPS 0 referenced
    Last message repeated 1 times
[h264 @ 0x470300] decode_slice_header error
[h264 @ 0x470300] no frame!
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
[mpegts @ 0x45ad20] pid=83 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=82 pes_code=0x1bd
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
[h264 @ 0x470300] Frame num gap 42 37
[h264 @ 0x470300] Frame num gap 42 38
[h264 @ 0x470300] Frame num gap 42 39
[h264 @ 0x470300] Frame num gap 42 40
[h264 @ 0x470300] mmco: unref short failure
[h264 @ 0x470300] number of reference frames (0+5) exceeds max (4; probably corrupt input), discarding one
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
[h264 @ 0x470300] no picture ooo
[mpegts @ 0x45ad20] pid=84 pes_code=0x1bd
[mpegts @ 0x45ad20] PAT:
[mpegts @ 0x45ad20] PMT: len 103
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
[h264 @ 0x470300] Increasing reorder buffer to 2
[h264 @ 0x470300] no picture ooo
[mpegts @ 0x45ad20] pid=78 pes_code=0x1e0
[h264 @ 0x470300] no picture

I'm using vlc to test if the udp stream is available without success.

Can some one point me to the good direction on how to convert the http stream to an udp or an rtp stream without touching the stream data.

Best regards.

Hello to all,
Have somebody test scam 3.52 on the new image Pli Jade3? Because i have tested and it seem to not start on dm500.
Everytime I'm starting scam on telnet it give me the error: "scam: error while loading shared libraries: libssl.so.0.9.7: cannot open shared object file: No such file or directory" and I don't know were to find this library. I hat found an arhyve with scam and these lib but when i use that it give me another error "scam: relocation error: /var/lib/libssl.so.0.9.7: undefined symbol: X509_NAME_free" (i think because is compiled for some other imag for dream.
Any ideea how to make it run.
10X 

I am using box with python 2.7.13 and openssl 1.0.2k and got these errors when downloading https images using twisted web.

I do not have problem in downloading https by other methods but need twisted web because i want to download images simultaneously in background without stopping code execution. 

image url example   

https://www.almstba.tv/video/uploads/thumbs/718173fd7-1.jpg

/usr/lib/enigma2/python/e2reactor.py:184:_doReadOrWrite
/usr/lib/python2.7/site-packages/twisted/internet/tcp.py:208:doRead
/usr/lib/python2.7/site-packages/twisted/internet/tcp.py:214:_dataReceived
/usr/lib/python2.7/site-packages/twisted/protocols/tls.py:415:dataReceived
--- <exception caught here> ---
/usr/lib/python2.7/site-packages/twisted/protocols/tls.py:335:_checkHandshakeStatus
/usr/lib/python2.7/site-packages/OpenSSL/SSL.py:1426:do_handshake
/usr/lib/python2.7/site-packages/OpenSSL/SSL.py:1174:_raise_ssl_error
/usr/lib/python2.7/site-packages/OpenSSL/_util.py:48:exception_from_error_queue

I collect kodi 17.6. I added plugin inputstream-adaptive. It assembles and installs without errors. In the youtube plugin, when selecting a source, the MPD link appears. If I reproduce via the kodi video player, then playback is performed, but only 1080P. If there is no playback through the internal player enigma2.It depends on the plugin or enigma2 does not understand the format of this file?

This one is cute, I found this plugin by chance, EventNavigator by @vlamo, unzip and copy to

/usr/lib/enigma2/python/Plugins/SystemPlugins/

restart enigma2, in channel selction press seek keys >> <<, you can now navigate in future events untill EPG reaches the end, forward and back, this should be integrateted into channel selectin if possible